Nordik Recovery 3-Person Infrared Sauna 2.0^TM New Gen

After more than 5,000 Nordik Recovery infrared saunas made their way into customers' homes, we had an enormous amount of real-world feedback to work with. Our Infrared Sauna 2.0 is the result of taking what customers loved about the original models and refining the areas where we knew we could make the experience even better.

For the 3-Person model, the assembly process was already simpler by design. Its centered door integrates into the front structure without requiring the separate hinge installation and alignment process used on our previous smaller models, so the same assembly redesign was not necessary.

We redesigned key components to achieve ultra-low EMF performance. Our Infrared Sauna 2.0 has been independently tested at below 0.75 mG at the seated position and below 2 mG at just 2 inches from the heaters.

The new generation is also ETL certified to applicable North American electrical safety standards, adding independent verification of the electrical safety and compliance of the product.

Beyond those headline improvements, we've refined construction, fit and finish, materials and smaller details throughout the sauna based on what we've learned from thousands of customers and installations.

The result is our most refined generation yet, preserving the full-spectrum infrared experience, Canadian Hemlock construction and spacious three-person layout customers already loved while adding independently verified ultra-low EMF performance, ETL certification and thoughtful refinements throughout.

A traditional sauna heats the air to very high temperatures, which then heats your body. An infrared sauna warms your body directly using light waves, creating a deeper, more comfortable heat at lower air temperatures. It is easier to breathe in and produces a faster sweat response.

Full-spectrum infrared supports circulation, muscle recovery, joint mobility, detoxification, skin health, inflammation reduction, stress relief, and better sleep. Because the heat penetrates deeper into the tissues, the wellness effects are a lot more noticeable than far-infrared alone.

Our sauna uses true full-spectrum infrared, delivers very low EMF levels, and is built with a low VOC solid Hemlock interior. We design everything in Canada, offer modular servicing for easy repairs, and sell directly with no retail markup, which gives you much greater value for the quality.

Our new generation of saunas delivers ultra-low EMF performance, measuring below 0.75 mG at the seated position and below 2 mG at just 2 inches from the heaters. These results have been independently verified by an accredited third-party laboratory and are available to the public.

Want to review the test report? Contact us and our team will be happy to provide a copy.

Nordik Recovery infrared saunas are ETL certified to applicable North American electrical safety standards and are manufactured in accordance with CE and ISO 9000 quality standards, reflecting our commitment to safety, quality and consistent manufacturing.

• The 1-person model fits one adult comfortably. It has external dimensions of W: 31.5" x D: 35.4" x H: 66.9". Even if it's shorter, it can fit seated adults of up to 6'6"
• The 2-person model allows two adults to sit side-by-side comfortably. It has external dimensions of W: 47.2" x D: 41.3" x H: 74.8".
• The 3-person model fits up to three adults side-by-side. It has external dimensions of W: 60.2" x D: 43.3" x H: 74.8".

The entire interior is made of 100% solid Canadian Hemlock with no plywood, MDF, varnish, stain, or chemical coatings. The cabin is low in VOC and safe to breathe inside.

Yes, each sauna has a built-in passive air vent to maintain fresh airflow during your session. For proper operation and easy installation, please allow the following clearances:

• 2 inches on each side
• 4 inches behind
• 6 inches above
• 12 inches in front of the door for opening.

This helps the cabin breathe and ensures consistent temperature performance.

The sauna is designed for indoor use. A sheltered patio can work as long as the space stays fully dry and above 10°C at all times. If temperatures fall below this threshold, the sauna will struggle to reach proper heat as it is not insulated.

All of our units are plug-and-play and do not require electricians or hardwiring for installation.

• Our 1 and 2-person models require a dedicated 15 A / 120 V outlet, the standard ones found in North American homes.
• Our 3-person model requires a dedicated 20 A / 120 V outlet, which is typically found in your garages, kitchens or laundry rooms. If your room of choice does not have a 120 V / 20 A outlet, an electrician can easily install one.

At a 20°C room temperature, the sauna reaches ready-to-sweat warmth in 10 min and maximum temperatures of 60-65 °C in ~20 min. Our full spectrum technology allows quicker heat up times vs other far infrared saunas.

Each model includes full-spectrum infrared heaters, far-infrared carbon side panels, heated floors, LED lighting with multiple color modes, a digital control panel, built-in ventilation and bluetooth speakers.

Your sauna ships securely in a custom wooden crate for added protection in transit. With our new Canadian distribution hub network in Toronto, Montréal, Calgary and Vancouver, orders can be fulfilled closer to home for faster transit times and a smoother delivery experience.

Assembly is straightforward, with clip-on panels that fit together around the cabin structure. The 3-Person model requires no separate hinge installation or door alignment, keeping the process simple from start to finish.

We recommend two people for assembly, with an expected setup time of approximately 1 hour.

Electrical connections inside the sauna are plug-and-play, and no electrician is required as long as a dedicated 20 A, 120 V outlet is already available.

Every Nordik Recovery infrared sauna includes a 2-year comprehensive warranty covering both the structure and electronics.

Our modular design makes servicing straightforward, with individual heaters, control components and panels designed to be replaced without replacing the entire sauna. Warranty support, troubleshooting and replacement parts are handled by our Canadian team, giving you direct access to local service and support when you need it.

For additional peace of mind, optional extended warranty plans are also available, allowing you to extend your total coverage to 3, 4 or 5 years inclusively.

Our sauna does not include built-in red light therapy panels. The reason is simple: LED red-light systems do not perform well inside a heated, humid sauna environment. High temperatures and vapor drastically shorten their lifespan, and most panels require additional wattage that would push a standard household circuit beyond safe limits.

Instead, our units use full-spectrum infrared heaters (NIR + MIR + FIR), which deliver a broader range of wellness benefits than red light can inside a sauna.

Full spectrum provides:

• Deep tissue heating
• Faster muscle recovery
• Stronger circulation
• Detoxification and sweating
• Relaxation and pain relief
• Faster heat up times

Red light therapy focuses on surface-level cellular benefits like collagen support and inflammation reduction. These are valuable, but they do not replace the core heat-based therapeutic effects of infrared.

If you still want red light therapy, you can absolutely bring a free-standing red-light panel into the room and use it during your session.

Our saunas are designed in Montréal and manufactured in China in partnership with a specialized facility that has been producing premium infrared saunas for more than 20 years. The facility also manufactures for several established sauna brands worldwide, giving us access to deep manufacturing expertise and proven production processes.

Product development, engineering and quality standards are managed by our in-house Canadian team. By combining Canadian design and oversight with an experienced manufacturing partner, we're able to deliver premium materials, full-spectrum heating, ultra-low EMF performance and thoughtful construction at a more accessible price.

Every sauna undergoes an independent third-party quality-control inspection before leaving the factory. Our products are also built to recognized quality and safety standards, including ETL certification for North American electrical safety, CE compliance, ISO 9000 manufacturing standards and additional independent third-party testing.

Beyond manufacturing, our Canadian team manages customer service, servicing and replacement parts locally from Montréal, so support remains close to home long after your sauna is delivered.

The result is a sauna backed by experienced manufacturing, Canadian product oversight and independent testing; built to the quality and safety standards we expect from every Nordik Recovery product.

🇨🇦 For Canadian Customers

Standard sauna shipping is $199 CAD. For a limited time, we're offering FREE shipping to eligible Canadian addresses, excluding remote areas.

Orders ship domestically from the closest available Nordik Recovery distribution hub in Montréal, Toronto, Calgary or Vancouver, helping reduce transit times and get your sauna to you faster.

Remote and certain extended-service areas may be subject to additional shipping fees.

🇺🇸 For United States Customers

All saunas ship from our US fulfillment partner, so delivery stays within the United States. All prices displayed on our US website (www.nordikrecovery.store) already include:

• Duties
• Tariffs
• Taxes

There are no additional border or import fees for US customers.